d
Roof Cements and Adhesives
| Black Plastic Roof Cement |
Item number: 83100 |
| A heavy bodied asphaltic base roof cement formulated with fillers and fibers to be tough. It's asphalt base allows the cement to remain soft and pliable which increases durability. The cement will form a tight waterproof bond that expands and contracts with the weather. It is heavy bodied enough to adhere on steeply sloped surfaces without running. Use it around chimneys, downspouts, skylights, gutters and roof vents to waterproof and repair leaks and seal cracks. | |
| Available in 55 Gallon, 5 Gallon, 1 Gallon and 1 Quart Containers. | |
| Wet & Dry Surface Roof Cement |
Item number: 83150 |
| A heavy bodied roof cement uniquely formulated to adhere to wet or dry surfaces. This trowel grade product is excellent for emergency repairs where immediate repairs are required on damp or wet surfaces. Its asphalt base allows the cement to remain soft and pliable while forming a tight waterproof bond that expands and contracts with the weather. | |
| Available in 5 Gallon, 1 Gallon, 1 Quart and Caulking Cartridges. | |
| Flashing Cement |
Item number: 82570 |
| #82570 is a heavy-bodied asphaltic roof cement for use in a cold process, built-up roofing where a pliable, plastic body waterproof product is required. It creamy consistency makes it excellent for sealing holes and cracks around chimneys, downspouts, skylights, vent pipes, gutters, and valleys. Also, excellent for sealing cracks in foundations and outside walls. Use on flat or steep roofs made of concrete, felt, metal, and composition. It will not run in hot weather or crack in cold weather, but keeps an elastic effect which expands and contracts with temperature changes. | |
| Available in 5 Gallon, 3, Gallon, and 1 Gallon. | |
| Asphalt Adhesive - Blind Nail Cement |
Item number: 81200 |
| This cold process adhesive is made from special quick-setting asphalts, fast drying solvents and reinforcing fibers. Used as a blind nail or lap cement, this product softens the asphalt coating on both layers of roofing sheets to be bonded, allowing them to weld together. Recommended for a variety of roofing sheets such as 45#, 55#, and 65# smooth roll roofing, 90# slate surfaced roofing, glass cap sheets and bonding selvage edge roofing. Not recommended for hot mop felts such as 15# or 30# asphalt felt. | |
| Available in 55 Gallon, 5 Gallon and 1 Gallon containers. | |
| Modified Bitumen Adhesive |
Item number: 82820 |
| A fibrated rubberized adhesive fortified with SBS polymers specially designed for cementing polymer modified asphalt coated membranes together. It sets by loss of solvent through evaporation producing a strong bond with excellent low temperature flexibility. The cured bond resists failures associated with thermal shock and eliminates many of the fire hazards associated with torch or hot mopped systems. It may also be used as a top quality blind nailing cement when applying roofing felts. Available in brush or trowel grade. | |
| Available in 55 Gallon, 5 Gallon and 1 Gallon containers. | |
|
MSDS • Spec |
|
